甲基丙烯酸羟烷基酯与丙烯腈或丙烯酰胺共聚合的研究

测定了亲水性甲基丙烯酸羟烷基酯如HEMA、MHPMA分别与AN或AAM,在60℃不同溶剂中自由基聚合反应的竞聚率。AN(M_1)-HEMA(M_2)共单体,在DMSO或DMF溶剂以AIBN或KPS-IPA引发剂条件下共聚,用Kelen-Tüds法计算的竞聚率变化不大,r_1=0.22-0.25、r_2=0.97-1.05,说明在此均相溶液共聚中,所用的溶剂及引发剂对竞聚率的影响较小,这两种单体能很好共聚。但AAM-MHPMA或AAM-HEMA共单体时,r_1与r_2值相差很大,如前者r_1=0.0433、r_2=3.98,后者r_1=0.0535、r_2=1.89,说明不易共聚,共聚物中主要是MHPMA或HEMA组分。     

A new two‐dimensional CdII coordination polymer constructed by pyrazine‐2,3‐dicarboxyl­ate

In the title compound, poly[μ₅‐pyrazine‐2,3‐dicarboxyl­ato‐cadmium(II)], [Cd(C₆H₂N₂O₄)]_n or [Cd(pdc)]_n, where pdc is the pyrazine‐2,3‐dicarboxyl­ate anion, the Cd^II atom is six‐coordinated by five carboxyl­ate O atoms and one N atom from five different pdc ligands in a distorted octa­hedral CdO₅N coordination geometry. Two Cd^II atoms are bridged by carboxyl­ate groups of the pdc ligands to create a dimeric unit. The dimeric units are further connected by the pdc ligands to generate an inter­esting two‐dimensional structure.     

MICRO-PHASE SAEPARATION IN EPOXY RESIN WATERBORNE PARTICLES DURING CURING PROCESS

Sub-micron sized phenolic epoxy resin waterborne particles were prepared by phase inversion emulsification. Micro-phase separation occurred during the curing process at high temperature. The as-prepared samples possessed one glass transition temperature （Tg） and two exothermal processes during DSC heating scannings. After being thermally treated above the exothermal peak temperature, they possessed two glass transition temperatures with the disappearance of exothermal peaks, whilst a core/shell structure was formed. This was likely related with the outward diffusion of reactive oligomers to the outer layer of particles.     

Fine structures of zeolite-Linde-L (LTL): surface structures, growth unit and defects

High-resolution electron microscopy (HREM) has been used to image the surface structure of nano- and micrometer-sized synthetic crystals of zeolite-Linde-L (LTL). Columnar holes and rotational, nano-sized, wheel-like defects were observed within the crystals, where the hole has a minimum size equal to that of the rotational defect. Predictions of surface structure from atomistic computer simulation concur with the observations from HREM and provide insight into the crystal growth mechanism of perfect and defective LTL. Analysis of the energetics of the formation of rotational defect structures reveals that the driving force for defect creation is thermodynamic and furthermore, the rotational defects could be created in high concentrations. Formation of a columnar hole is found to be slightly energetically unfavourable and therefore we speculate that the incidence of both rotational and nano-sized vacancy defects is strongly dependent on kinetic factors and reaction conditions. The morphology of nano- and microcrystalline LTL is contradistinct and we use insights from simulation to propose an explanation of the disparity in crystal shape.     

Analysis of guanidine in high salt and protein matrices by cation-exchange chromatography and UV detection

A simple and sensitive HPLC method for quantitative determination of guanidine in high salt and protein matrices was developed. The HPLC system consisted of an Agilent 1100 pump with an online degasser, a UV detector, an autosampler, and Dionex CS 14 cation-exchange guard (4 mm x 50 mm) and analytical (4 mm x 250 mm) columns. The mobile phase was 3.75 mM methanesulfonic acid (MSA) with a flow rate of 1 mL/min. The other analysis parameters were: 50 microL injection volume, 195 nm UV detection, and 21 min runtime. The limit of quantitation (LOQ) for guanidine HCl was determined to be 0.25 mg/L and the standard curve ranged from 0.25 mg/L to 10 mg/L. Sample preparation was required for the samples containing high protein concentrations. Proteins were removed by centrifuging a sample in a 30 K NanoSep centrifugal filter at 15,300 x g for 20 min. The method could determine guanidine accurately in sample matrices containing up to 200 mM sodium ion or up to 50 mM potassium ion. The method can be used for clearance testing of guanidine in biopharmaceutical products.     

Hydrogenation of CO over carbides of tungsten

CO hydrogenation on tungsten carbides has been investigated.The methanation activitiesof tungsten carbides are comparable to that of supported Group VIII metal catalysts.Temperature-programmed thermal desorption spectra of CO on tungsten carbide show that CO is adsorbed non-dissociatively,and the surface—CO bond appears to be rather weak.     

配合物聚合反应研究──Ⅱ．以二氨基磺磷酸盐配合物合成聚脲

以二氨基磺酸盐配合物合成了一系列主链上合金属元素（Ｃａ，Ｎｉ，Ｃｏ，Ｃｕ）的聚脲聚合物．用ＩＲ和１ＨＮＭＲ对其结构进行了表征，以ＴＧ－ＤＴＡ研究了其热性能，并讨论了金属元素种类及其含量对聚脲聚合物溶液粘度的影响．